Identification and characterization of quaternary ammonium compounds in Flemish indoor dust by ion-mobility high-resolution mass spectrometry.

Quaternary ammonium compounds (QACs) are a class of surfactants commonly used in disinfecting and cleaning products. Their use has substantially increased during the COVID-19 pandemic leading to increasing human exposure. QACs have been associated with hypersensitivity reactions and an increased risk of asthma. This study introduces the first identification, characterization and semi-quantification of QACs in European indoor dust using ion-mobility high-resolution mass spectrometry (IM-HRMS), including the acquisition of collision cross section values (DTCCSN2) for targeted and suspect QACs. A total of 46 indoor dust samples collected in Belgium were analyzed using target and suspect screening. Targeted QACs (n = 21) were detected with detection frequencies ranging between 4.2 and 100 %, while 15 QACs showed detection frequencies > 90 %. Semi-quantified concentrations of individual QACs showed a maximum of 32.23 µg/g with a median ∑QAC concentration of 13.05 µg/g and allowed the calculation of Estimated Daily Intakes for adults and toddlers. Most abundant QACs matched the patterns reported in indoor dust collected in the United States. Suspect screening allowed the identification of 17 additional QACs. A dialkyl dimethyl ammonium compound with mixed chain lengths (C16:C18) was characterized as a major QAC homologue with a maximum semi-quantified concentration of 24.90 µg/g. The high detection frequencies and structural variabilities observed call for more European studies on potential human exposure to these compounds. For all targeted QACs, drift tube IM-HRMS derived collision cross section values (DTCCSN2) are reported. Reference DTCCSN2 values allowed the characterization of CCS-m/z trendlines for each of the targeted QAC classes. Experimental CCS-m/z ratios of suspect QACs were compared with the CCS-m/z trendlines. The alignment between the two datasets served as an additional confirmation of the assigned suspect QACs. The use of the 4bit multiplexing acquisition mode with consecutive high-resolution demultiplexing confirmed the presence of isomers for two of the suspect QACs.

Determination of 25 quaternary ammonium compounds in sludge by liquid chromatography-mass spectrometry.

With the pandemic of COVID-19, the application of quaternary ammonium compounds (QACs), which can be used in SARS-CoV-2 disinfection products, has increased substantially. QACs cumulated in sewer system are ultimately deposited and enriched in sludge. QACs in the environment can adversely affect human health and the environment. In this study, a liquid chromatography-mass spectrometry method was established for the simultaneous determination of 25 QACs in sludge samples. Ultrasonic extraction and filtration of the samples was performed using a 50 mM hydrochloric acid-methanol solution. The samples were separated by liquid chromatography and detected in multiple reaction monitoring mode. The matrix effects of the sludge on the 25 QACs ranged from - 25.5% to 7.2%. All substances showed good linearity in the range of 0.5-100 ng/mL, with all determination coefficients (R2) greater than 0.999. The method detection limits (MDLs) were 9.0 ng/g for alkyltrimethylammonium chloride (ATMAC), 3.0 ng/g for benzylalkyldimethylammonium chloride (BAC), and 3.0 ng/g for dialkyldimethylammonium chloride (DADMAC). The spiked recovery rates were in the range of 74-107%, while the relative standard deviations were in the range of 0.8-20.6%. Considering its sensitivity, accuracy, and easy operation, the proposed method in this study was used to determine 22 sludge samples collected from a comprehensive wastewater treatment plant. The results showed that the concentrations of ΣATMACs, ΣBACs, and ΣDADMACs were 19.684, 3.199, and 8.344 µg/g, respectively. The main components included ATMAC-C16, ATMAC-C18, ATMAC-C20, ATMAC-C22, BAC-C12, and DADMAC-C18:C18, with concentrations exceeding 1.0 µg/g. The concentration relationships of different components in the congeners showed that some components were of similar origin.

Low concentration quaternary ammonium compounds promoted antibiotic resistance gene transfer via plasmid conjugation.

During the pandemic of COVID-19, the amounts of quaternary ammonium compounds (QACs) used to inactivate the virus in public facilities, hospitals and households increased, which raised concerns about the evolution and transmission of antimicrobial resistance (AMR). Although QACs may play an important role in the propagation of antibiotic resistance gene (ARGs), the potential contribution and mechanism remains unclear. Here, the results showed that benzyl dodecyl dimethyl ammonium chloride (DDBAC) and didecyl dimethyl ammonium chloride (DDAC) significantly promoted plasmid RP4-mediated ARGs transfer within and across genera at environmental relevant concentrations (0.0004-0.4 mg/L). Low concentrations of QACs did not contribute to the permeability of the cell plasma membrane, but significantly increased the permeability of the cell outer membrane due to the decrease in content of lipopolysaccharides. QACs altered the composition and content of extracellular polymeric substances (EPS) and were positively correlated with the conjugation frequency. Furthermore, transcriptional expression levels of genes encode for mating pairing formation (trbB), DNA replication and translocation (trfA), and global regulators (korA, korB, trbA) are regulated by QACs. And we demonstrate for the first time that QACs decreased the concentration of extracellular AI-2 signals, which was verified to be involved in regulating conjugative transfer genes (trbB, trfA). Collectively, our findings underscore the risk of increased disinfectant concentrations of QACs on the ARGs transfer and provide new mechanisms of plasmid conjugation.

Antioxidant and Anti-Breast Cancer Properties of Hyaluronidase from Marine Staphylococcus aureus (CASMTK1)

This work studied the antioxidant and anti-breast cancer properties of hyaluronidase, extracted from a potential marine strain, Staphylococcus aureus (CASMTK1), isolated from Parangipettai coastal waters in southeast coast of India. The Staphylococcal enzyme production was tested under different carbon and nitrogen sources;and recorded the maximum production when the microbial strain was cultured with starch as the carbon source and ammonium sulphate as the inorganic nitrogen source with the enzyme production of 92.5 U/mL and 95.0 U/mL, respectively. The hyaluronidase enzyme production was also tested in different pH and temperature;and recorded the maximum yield of 102.5 U/mL in pH 5 and that of 95.5 U/mL in 45 °C. The partially purified enzyme was subjected to FTIR and FT Raman technique and found the presence of the amide- I and II, Carboxyl, N-H bending, C-H stretching and α-helices and β-sheet proteins between wave number 1500–1700 cm−1. The partially purified enzyme also exhibited strong antioxidant and in-vitro breast cancer properties. The enzyme showed the highest hydroxyl radical scavenging activity of 79% at the 50 µg/mL concentration, and this activity increased in a dose-dependent manner. The enzyme inhibited proliferation of the breast cancer cell line of MCF-7, and it caused 100% cell death at the concentration of 80 µg/mL. The enzyme generated capacity of producing free radicles that damage the cancer cells, and this effect was very nearer to the standard drug, paclitaxel. The enzyme damaged the cancer cells and induced apoptosis in 78% of cancer cells as evident by condensed or fragmented chromatin at 40 µg/mL. Further purification of the enzyme, analysis of its molecular aspects, and elucidation of exact mechanisms of its biological activities will throw new light on the utility of staphylococcal hyaluronidase in anticancer chemotherapy.

Quaternary ammonium disinfectants and antiseptics: tolerance, resistance and potential impact on antibiotic resistance.

BACKGROUND: Due to the substantial increase in the use of disinfectants containing quaternary ammonion compounds (QACs) in healthcare and community settings during the COVID-19 pandemic, there is increased concern that heavy use might cause bacteria to develop resistance to QACs or contribute to antibiotic resistance. The purpose of this review is to briefly discuss the mechanisms of QAC tolerance and resistance, laboratory-based evidence of tolerance and resistance, their occurrence in healthcare and other real-world settings, and the possible impact of QAC use on antibiotic resistance. METHODS: A literature search was conducted using the PubMed database. The search was limited to English language articles dealing with tolerance or resistance to QACs present in disinfectants or antiseptics, and potential impact on antibiotic resistance. The review covered the period from 2000 to mid-Jan 2023. RESULTS: Mechanisms of QAC tolerance or resistance include innate bacterial cell wall structure, changes in cell membrane structure and function, efflux pumps, biofilm formation, and QAC degradation. In vitro studies have helped elucidate how bacteria can develop tolerance or resistance to QACs and antibiotics. While relatively uncommon, multiple episodes of contaminated in-use disinfectants and antiseptics, which are often due to inappropriate use of products, have caused outbreaks of healthcare-associated infections. Several studies have identified a correlation between benzalkonium chloride (BAC) tolerance and clinically-defined antibiotic resistance. The occurrence of mobile genetic determinants carrying multiple genes that encode for QAC or antibiotic tolerance raises the concern that widespread QAC use might facilitate the emergence of antibiotic resistance. Despite some evidence from laboratory-based studies, there is insufficient evidence in real-world settings to conclude that frequent use of QAC disinfectants and antiseptics has promoted widespread emergence of antibiotic resistance. CONCLUSIONS: Laboratory studies have identified multiple mechanisms by which bacteria can develop tolerance or resistance to QACs and antibiotics. De novo development of tolerance or resistance in real-world settings is uncommon. Increased attention to proper use of disinfectants is needed to prevent contamination of QAC disinfectants. Additional research is needed to answer many questions and concerns related to use of QAC disinfectants and their potential impact on antibiotic resistance.

Excessive disinfection aggravated the environmental prevalence of antimicrobial resistance during COVID-19 pandemic.

During COVID-19 pandemic, chemicals from excessive consumption of pharmaceuticals and disinfectants i.e., antibiotics, quaternary ammonium compounds (QACs), and trihalomethanes (THMs), flowed into the urban environment, imposing unprecedented selective pressure to antimicrobial resistance (AMR). To decipher the obscure character pandemic-related chemicals portrayed in altering environmental AMR, 40 environmental samples covering water and soil matrix from surroundings of Wuhan designated hospitals were collected on March 2020 and June 2020. Chemical concentrations and antibiotic resistance gene (ARG) profiles were revealed by ultra-high-performance liquid chromatography-tandem mass spectrometry and metagenomics. Selective pressure from pandemic-related chemicals ascended by 1.4-5.8 times in March 2020 and then declined to normal level of pre-pandemic period in June 2020. Correspondingly, the relative abundance of ARGs under increasing selective pressure was 20.1 times that under normal selective pressure. Moreover, effect from QACs and THMs in aggravating the prevalence of AMR was elaborated by null model, variation partition and co-occurrence network analyses. Pandemic-related chemicals, of which QACs and THMs respectively displayed close interaction with efflux pump genes and mobile genetic elements, contributed >50 % in shaping ARG profile. QACs bolstered the cross resistance effectuated by qacEΔ1 and cmeB to 3.0 times higher while THMs boosted horizon ARG transfer by 7.9 times for initiating microbial response to oxidative stress. Under ascending selective pressure, qepA encoding quinolone efflux pump and oxa-20 encoding ß-lactamases were identified as priority ARGs with potential human health risk. Collectively, this research validated the synergistic effect of QACs and THMs in exacerbating environmental AMR, appealing for the rational usage of disinfectants and the attention for environmental microbes in one-health perspective.

Toxicity of the disinfectant benzalkonium chloride (C14) towards cyanobacterium Microcystis results from its impact on the photosynthetic apparatus and cell metabolism

Quaternary ammonium compounds (QACs) are commonly used in a variety of consumer and commercial products, typically as a component of disinfectants. During the COVID-19 pandemic, QACs became one of the primary agents utilized to inactivate the SARS-CoV-2 virus on surfaces. However, the ecotoxicological effects of QACs upon aquatic organisms have not been fully assessed. In this study, we examined the effects of a widely used QAC (benzalkonium chloride-C14, BAC-14) on two toxigenic Microcystis strains and one non-toxigenic freshwater Microcystis strain and carried out an analysis focused on primary, adaptive and compensatory stress responses at apical (growth and photosynthesis) and metabolic levels. This analysis revealed that the two toxic Microcystis strains were more tolerant than the non-toxic strain, with 96 hr-EC50 values of 0.70, 0.76, and 0.38 mg/L BAC-14 for toxigenic M. aeruginosa FACHB-905, toxigenic M. aeruginosa FACHB-469, and non-toxigenic M. wesenbergii FACHB-908, respectively. The photosynthetic activities of the Microcystis, assessed via Fv/Fm values, were significantly suppressed under 0.4 mg/L BAC-14. Furthermore, this analysis revealed that BAC-14 altered 14, 12, and 8 metabolic pathways in M. aeruginosa FACHB-905, M. aeruginosa FACHB-469, and M. wesenbergii FACHB-908, respectively. It is noteworthy that BAC-14 enhanced the level of extracellular microcystin production in the toxigenic Microcystis strains, although cell growth was not significantly affected. Collectively, these data show that BAC-14 disrupted the physiological and metabolic status of Microcystis cells and stimulated the production and release of microcystin, which could result in damage to aquatic systems. © 2022

[Migration, Transformation, and Toxicity of Quaternary Ammonium Antimicrobial Agents in the Environment].

Quaternary ammonium compounds (QACs) are one type of widely used cationic biocide, and their usage amount is growing rapidly due to the flu and COVID-19 pandemic. Many QACs were released into the environment in or after the course of their use, and thus they were widely detected in water, sediment, soil, and other environmental media. QACs have stronger surface activity and non-specific biotoxicity, which poses a potential threat to the ecosystem. In this study, the environmental fate and potential toxicity of QACs were documented in terms of their migration and transformation process, biological toxicity effects, and the main mechanisms of bacterial resistance to QACs. Aerobic biodegradation was the main natural way of eliminating QACs in the environment, and the reaction was mainly initiated by the hydroxylation of C atoms at different positions of QACs and finally mineralized to CO2and H2O through decarboxylation, demethylation, and ß-oxidation reaction. Toxicological studies showed that QACs at environmental concentrations could not pose acute toxicity to the selected biotas but threatened the growth and reproduction of aquatic organisms like Daphnia magna. Their toxicity effects depended on their molecular structure, the tested species, and the exposed durations. Additionally, our team first investigated the toxicity effects and mechanisms of QACs toward Microcystis aeruginosa, which showed that QACs depressed the algae growth through the denaturation of photosynthetic organelles, suppression of electron transport, and then induction of cell membrane damage. In the environment, the concentrations of QACs were always lower than their bactericidal concentrations, and their degradation could induce the formation of a concentration gradient, which facilitated microbes resistant to QACs. The known resistance mechanisms of bacteria to QACs mainly included the change in cell membrane structure and composition, formation of biofilm, overexpression of the efflux pump gene, and acquisition of resistance genes. Due to the similar targets and mechanisms, QACs could also induce the occurrence of antibiotic resistance, mainly through co-resistance and cross-resistance. Based on the existing data, future research should emphasize the toxicity effect and the potential QACs resistance mechanism of microorganisms in real environmental conditions.

Study of Cationic Surfactants Raw Materials for COVID-19 Disinfecting Formulations by Potentiometric Surfactant Sensor.

The behavior of a new 1,3-dioctadecyl-1H-imidazol-3-ium tetraphenylborate (DODI-TPB) surfactant sensor was studied in single and complex mixtures of technical grade QACs-benzalkonium chloride (BAC), N,N-didecyl-N,N-dimethylammonium chloride (DDAC), and N,N-dioctyl-N,N-dimethylammonium chloride (DOAC) usually used in COVID-19 disinfecting agents formulations. The results obtained with the new DODI-TPB sensor were in good agreement with data measured by a 1,3-dihexadecyl-1H-benzo[d]imidazol-3-ium-tetraphenylborate (DMI-TPB) surfactant sensor, as well as two-phase titration used as a reference method. The quantitative titrations of a two-component mixture of the cationic homologs (a) DDAC and DOAC; and (b) BAC and DOAC showed that the new DODI-TPB surfactant sensor can clearly distinguish two separate mixture components in a single potentiometric titration curve with two characteristic inflexion points. The consumption of SDS (used as a titrant) in the end-point 1 (EP 1) corresponded to the content of DDAC (or BAC), whereas the consumption in the end-point 2 (EP 2) corresponded to the total content of both cationic surfactants in the mixture. DOAC content in both mixtures can be calculated from the difference of the titrant used to achieve EP1 and EP2. The addition of nonionic surfactants resulted in the signal change decrease from 333.2 mV (1:0; no nonionic surfactant added) to 243.0 mV (1:10, w/w). The sensor was successfully tested in ten two-component COVID-19 disinfecting formulations.

Quaternary ammonium compounds of emerging concern: Classification, occurrence, fate, toxicity and antimicrobial resistance.

Amplified hygiene and precautionary measures are of utmost importance to control the spread of COVID-19 and future infection; however, these changes in practice are projected to trigger a rise in the purchase, utilisation and hence, discharge of many disinfectants into the environment. While alcohol-based, hydrogen peroxide-based, and chlorine-based compounds have been used widely, quaternary ammonium compounds (QACs) based disinfectants are of significant concern due to their overuse during this pandemic. This review presents the classification of disinfectants and their mechanism of action, focusing on QACs. Most importantly, the occurrence, fate, toxicity and antimicrobial resistance due to QACs are covered in this paper. Here we collated evidence from multiple studies and found rising trends of concern, including an increase in the mass load of QACs at a wastewater treatment plant (WWTP) by 331% compared to before the COVID-19 pandemic, as well as an increases in the concentration of 62% in residential dust, resulting in high concentrations of QACs in human blood and breast milk and suggesting that these could be potential sources of persistent QACs in infants. In addition to increased toxicity to human and aquatic life, increased use of QACs and accelerated use of antibiotics and antimicrobials during the COVID-19 pandemic could multiply the threat to antimicrobial resistance.

Metagenomic insights into the effects of benzyl dodecyl dimethyl ammonium bromide (BDAB) shock on bacteria-driven nitrogen removal in a moving-bed biofilm reactor (MBBR).

The use of disinfectants made from quaternary ammonium compounds (QACs) has greatly increased since the outbreak of SARS-CoV-2. However, the effect of QACs on wastewater treatment performance is still unclear. In this study, a commonly used QAC, i.e., benzyl dodecyl dimethyl ammonium bromide (BDAB), was added to a moving-bed biofilm reactor (MBBR) to investigate BDAB's effect on nutrient removal. When the BDAB concentration was increased to 50 mg L-1, the ammonia removal efficiency (ARE) greatly decreased, as did the nitrate production rate constants (NPR). This inhibition was partly recovered by decreasing the BDAB concentration to 30 mg L-1. Metagenomic sequencing revealed the functional genera present during different stages of the control (Rc) and BDAB-added reactors (Re). The enriched genera (Rudaea, Nitrosospira, Sphingomonas, and Rhodanobacter) in Rc mainly related to the nitrogen metabolism, while the enriched genera in Re was BDAB-concentration dependent. Functional genes analysis suggested that a lack of ammonia oxidase-encoding genes (amoABC) may have caused a decrease in ARE in Re, while the efflux pump-encoding genes emrE, mdfA, and oprM and a gene encoding BAC oxygenase (oxyBAC) were responsible for BDAB resistance. The increase in the total abundance of antibiotic resistance genes (ARGs) in Re revealed a potential risk arising from BDAB. Overall, this study revealed the potential effect and ecological risks of BDAB introduction in WWTPs.

Phenotypic and Molecular Detection of Antiseptic Resistance Genes among Clinical Staphylococcus aureus Isolates During COVID-19 Pandemic

The coronavirus disease (COVID-19) pandemic has expanded the use of chlorhexidine digluconate, a biocide frequently used in hospitals, to inhibit the spread of infection. Genes responsible for resistance against the quaternary ammonium compound qac in Staphylococcus aureus isolates have been shown to confer tolerance to a number of biocidal chemicals, including chlorhexidine. The aim of this study was to determine the occurrence of antiseptic resistance genes (qacA/B and qacC) in clinical isolates of methicillin-susceptible (MSSA) and methicillin-resistant Staphylococcus aureus (MRSA). The study also aimed to investigate the association between the presence of the mecA, qacA/B, and qacC genes in MRSA isolates and the susceptibility of the isolates to chlorhexidine to evaluate its future use in the Theodor Bilharz Research Institute (TBRI) hospital, following the Centers for Disease Control and Prevention recommendations for patients with MRSA. S. aureus isolates (n = 100) were collected from inpatients and outpatients at TBRI. A minimal inhibitory concentration of chlorhexidine was also detected. Polymerase chain reaction was used to detect the mecA, qacA/B, and qacC genes. The results revealed that 84% of S. aureus isolates were MRSA. MRSA (61.9%) and MSSA (68.8%) isolates were susceptible to chlorhexidine. The qacA/B gene was more dominant, being detected in 34%, while qacC was detected in only 5% of S. aureus isolates. All S. aureus isolates with reduced susceptibility to chlorhexidine harbored either the qacA/B or qacC genes. The clinical use of chlorhexidine may continue to increase, emphasizing the significance of continuous caution underlining the emergence of new clones with reduced susceptibility and avoiding antiseptic misuse.

Toxicity of the disinfectant benzalkonium chloride (C14) towards cyanobacterium Microcystis results from its impact on the photosynthetic apparatus and cell metabolism

Quaternary ammonium compounds (QACs) are commonly used in a variety of consumer and commercial products, typically as a component of disinfectants. During the COVID-19 pandemic, QACs became one of the primary agents utilized to inactivate the SARS-CoV-2 virus on surfaces. However, the ecotoxicological effects of QACs upon aquatic organisms have not been fully assessed. In this study, we examined the effects of a widely used QAC (benzalkonium chloride-C14, BAC-14) on two toxigenic Microcystis strains and one non-toxigenic freshwater Microcystis strain and carried out an analysis focused on primary, adaptive and compensatory stress responses at apical (growth and photosynthesis) and metabolic levels. This analysis revealed that the two toxic Microcystis strains were more tolerant than the non-toxic strain, with 96 hr-EC50 values of 0.70, 0.76, and 0.38 mg/L BAC-14 for toxigenic M. aeruginosa FACHB-905, toxigenic M. aeruginosa FACHB-469, and non-toxigenic M. wesenbergii FACHB-908, respectively. The photosynthetic activities of the Microcystis, assessed via Fv/Fm values, were significantly suppressed under 0.4 mg/L BAC-14. Furthermore, this analysis revealed that BAC-14 altered 14, 12, and 8 metabolic pathways in M. aeruginosa FACHB-905, M. aeruginosa FACHB-469, and M. wesenbergii FACHB-908, respectively. It is noteworthy that BAC-14 enhanced the level of extracellular microcystin production in the toxigenic Microcystis strains, although cell growth was not significantly affected. Collectively, these data show that BAC-14 disrupted the physiological and metabolic status of Microcystis cells and stimulated the production and release of microcystin, which could result in damage to aquatic systems.

Ecological Risk Analysis for Benzalkonium Chloride, Benzethonium Chloride, and Chloroxylenol in US Disinfecting and Sanitizing Products.

Use of three topical antiseptic compounds-benzalkonium chloride (BAC), benzethonium chloride (BZT), and chloroxylenol (PCMX)-has recently increased because of the phaseout of other antimicrobial ingredients (such as triclosan) in soaps and other disinfecting and sanitizing products. Further, use of sanitizing products in general increased during the coronavirus (COVID-19) pandemic. We assessed the environmental safety of BAC, BZT, and PCMX based on best available environmental fate and effects data from the scientific literature and privately held sources. The ecological exposure assessment focused on aquatic systems receiving effluent from wastewater-treatment plants (WWTPs) and terrestrial systems receiving land-applied WWTP biosolids. Recent exposure levels were characterized based on environmental monitoring data supplemented by modeling, while future exposures were modeled based on a hypothetical triclosan replacement scenario. Hazard profiles were developed based on acute and chronic studies examining toxicity to aquatic life (fish, invertebrates, algae, vascular plants) and terrestrial endpoints (plants, soil invertebrates, and microbial functions related to soil fertility). Risks to higher trophic levels were not assessed because these compounds are not appreciably bioaccumulative. The risk analysis indicated that neither BZT nor PCMX in any exposure media is likely to cause adverse ecological effects under the exposure scenarios assessed in the present study. Under these scenarios, total BAC exposures are at least three times less than estimated effect thresholds, while margins of safety for freely dissolved BAC are estimated to be greater than an order of magnitude. Because the modeling did not specifically account for COVID-19 pandemic-related usage, further environmental monitoring is anticipated to understand potential changes in environmental exposures as a result of increased antiseptic use. The analysis presented provides a framework to interpret future antiseptic monitoring results, including monitoring parameters and modeling approaches to address bioavailability of the chemicals of interest. Environ Toxicol Chem 2022;41:3095-3115. © 2022 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

A new class of quaternary ammonium compounds as potent and environmental friendly disinfectants.

Quaternary ammonium compounds (QACs) are inexpensive and readily available disinfectants, and have been widely used, especially since the COVID-19 outbreak. The toxicity of QACs to humans has raised increasing concerns in recent years. Here, a new type of QACs was synthesized by replacing the alkyl chain with zinc phthalocyanine (ZnPc), which consists of a large aromatic ring and is hydrophobic in nature, similar to the alkyl chain of QACs. Three ZnPc-containing disinfectants were synthesized and fully characterized. These compounds showed 15-16 fold higher antimicrobial effect against Gram-negative bacteria than the well-known QACs with half-maximal inhibitory (IC50) values of 1.43 µM, 2.70 µM, and 1.31 µM, respectively. With the assistance of 680 nm light, compounds 4 and 6 had much higher bactericidal toxicities at nanomolar concentrations. Compound 6 had a bactericidal efficacy of close to 6 logs (99.9999% kill rate) at 1 µM to Gram-positive bacteria, including MRSA, under light illumination. Besides, these compounds were safe for mammalian cells. In a mouse model, compound 6 was effective in healing wound infection. Importantly, compound 6 was easily degraded at working concentrations under sunlight illumination, and is environmentally friendly. Thus, compound 6 is a novel and promising disinfectant.

Cationic Surfactants as Disinfectants against SARS-CoV-2.

The virucidal activity of a series of cationic surfactants differing in the length and number of hydrophobic tails (at the same hydrophilic head) and the structure of the hydrophilic head (at the same length of the hydrophobic n-alkyl tail) was compared. It was shown that an increase in the length and number of hydrophobic tails, as well as the presence of a benzene ring in the surfactant molecule, enhance the virucidal activity of the surfactant against SARS-CoV-2. This may be due to the more pronounced ability of such surfactants to penetrate and destroy the phospholipid membrane of the virus. Among the cationic surfactants studied, didodecyldimethylammonium bromide was shown to be the most efficient as a disinfectant, its 50% effective concentration (EC50) being equal to 0.016 mM. Two surfactants (didodecyldimethylammonium bromide and benzalkonium chloride) can deactivate SARS-CoV-2 in as little as 5 s.

Investigation into the Metabolism of Quaternary Ammonium Compound Disinfectants by Bacteria.

Since the start of the COVID-19 pandemic, our reliance on disinfectants and sanitizers and the use thereof has grown. While this may protect human health, it may be selecting for antimicrobial-resistant microorganisms, including those that are not only capable of growth in the presence of disinfectants but also thrive using this as an energy source. Furthermore, there is a growing concern in emerging nosocomial pathogens, which have shown resistance to antibiotics and disinfectants. This rise in resistance has led to the investigation of various mechanisms behind resistance, such as biofilms, efflux pumps, and mobile genetic elements. Although many resistance mechanisms have been identified, it was discovered that some potentially pathogenic microbes could metabolize these compounds, which remains an avenue for further investigation. Investigating alternative metabolic pathways in microorganisms capable of growth using disinfectants as their sole carbon and energy source may provide insight into the metabolism of quaternary ammonium compound (QAC)-based antimicrobials. Many of the metabolic reactions proposed include hydroxylation, N-dealkylation, N-demethylation, and ß-oxidation of QACs. If clear metabolic pathways and reactions are elucidated, possible alternative approaches to QACs may be advised. Alternatively, this may provide opportunities for biodegradation of the compounds that adversely affect the environment.

Secondary PM2.5 decreases significantly less than NO2 emission reductions during COVID lockdown in Germany

This study estimates the influence of anthropogenic emission reductions on the concentration of particulate matter with a diameter smaller than 2.5 µm (PM2.5) during the 2020 lockdown period in German metropolitan areas. After accounting for meteorological effects, PM2.5 concentrations during the spring 2020 lockdown period were 5 % lower compared to the same time period in 2019. However, during the 2020 pre-lockdown period (winter), PM2.5 concentrations with meteorology accounted for were 19 % lower than in 2019. Meanwhile, NO2 concentrations with meteorology accounted for dropped by 23 % during the 2020 lockdown period compared to an only 9 % drop for the 2020 pre-lockdown period, both compared to 2019. SO2 and CO concentrations with meteorology accounted for show no significant changes during the 2020 lockdown period compared to 2019. GEOS-Chem (GC) simulations with a COVID-19 emission reduction scenario based on the observations (23 % reduction in anthropogenic NOx emission with unchanged anthropogenic volatile organic compounds (VOCs) and SO2) are consistent with the small reductions of PM2.5 during the lockdown and are used to identify the underlying drivers for this. Due to being in a NOx-saturated ozone production regime, GC OH radical and O3 concentrations increased (15 % and 9 %, respectively) during the lockdown compared to a business-as-usual (BAU, no lockdown) scenario. Ox (equal to NO2+O3) analysis implies that the increase in ozone at nighttime is solely due to reduced NO titration. The increased O3 results in increased NO3 radical concentrations, primarily during the night, despite the large reductions in NO2. Thus, the oxidative capacity of the atmosphere is increased in all three important oxidants, OH, O3, and NO3. PM nitrate formation from gas-phase nitric acid (HNO3) is decreased during the lockdown as the increased OH concentration cannot compensate for the strong reductions in NO2, resulting in decreased daytime HNO3 formation from the OH + NO2 reaction. However, nighttime formation of PM nitrate from N2O5 hydrolysis is relatively unchanged. This results from the fact that increased nighttime O3 results in significantly increased NO3, which roughly balances the effect of the strong NO2 reductions on N2O5 formation. Ultimately, the only small observed decrease in lockdown PM2.5 concentrations can be explained by the large contribution of nighttime PM nitrate formation, generally enhanced sulfate formation, and slightly decreased ammonium. This study also suggests that high PM2.5 episodes in early spring are linked to high atmospheric ammonia concentrations combined with favorable meteorological conditions of low temperature and low boundary layer height. Northwest Germany is a hot-spot of NH3 emissions, primarily emitted from livestock farming and intensive agricultural activities (fertilizer application), with high NH3 concentrations in the early spring and summer months. Based on our findings, we suggest that appropriate NOx and VOC emission controls are required to limit ozone, and that should also help reduce PM2.5. Regulation of NH3 emissions, primarily from agricultural sectors, could result in significant reductions in PM2.5 pollution.

Trends in secondary inorganic aerosol pollution in China and its responses to emission controls of precursors in wintertime

The Chinese government recently proposed ammonia (NH3) emission reductions (but without a specific national target) as a strategic option to mitigate fine particulate matter (PM2.5) pollution. We combined a meta-analysis of nationwide measurements and air quality modeling to identify efficiency gains by striking a balance between controlling NH3 and acid gas (SO2 and NOx) emissions. We found that PM2.5 concentrations decreased from 2000 to 2019, but annual mean PM2.5 concentrations still exceeded 35 µg m-3 at 74 % of 1498 monitoring sites during 2015–2019. The concentration of PM2.5 and its components were significantly higher (16 %–195 %) on hazy days than on non-hazy days. Compared with mean values of other components, this difference was more significant for the secondary inorganic ions SO42-, NO3-, and NH4+ (average increase 98 %). While sulfate concentrations significantly decreased over this period, no significant change was observed for nitrate and ammonium concentrations. Model simulations indicate that the effectiveness of a 50 % NH3 emission reduction for controlling secondary inorganic aerosol (SIA) concentrations decreased from 2010 to 2017 in four megacity clusters of eastern China, simulated for the month of January under fixed meteorological conditions (2010). Although the effectiveness further declined in 2020 for simulations including the natural experiment of substantial reductions in acid gas emissions during the COVID-19 pandemic, the resulting reductions in SIA concentrations were on average 20.8 % lower than those in 2017. In addition, the reduction in SIA concentrations in 2017 was greater for 50 % acid gas reductions than for the 50 % NH3 emission reductions. Our findings indicate that persistent secondary inorganic aerosol pollution in China is limited by emissions of acid gases, while an additional control of NH3 emissions would become more important as reductions of SO2 and NOx emissions progress.